Sabrent USB 3.2 Type-C Tool-Free Enclosure For M.2 PCIe NVMe And SATA SSDs(Sabrent Usb 3 2 Type C Tool Free Enclosure For M 2 Pcie Nvme And Sata Ssds)
Original price was: $56.90.$39.83Current price is: $39.83.
- Elevate Your Shopping Experience
- Product guarantee 100% satisfaction
- The quality solution for all your needs.
- Streamlined service, designed for your convenience.
Sabrent EC-SNVE Overview
- 1Description
- 2Compatibility
- 3100% Tool-Less Design
- 4Design
- 5Speed
- 6Plug and Play
Use your own M.2 PCIe NVMe or SATA SSD with the Sabrent USB 3.2 Gen 2 Type-C Tool-Free M.2 SSD Enclosure. Featuring a tool-less design, you’ll be able to fit a 2242/2260/2280 M.2 PCIe NVMe or SATA SSD into this enclosure. The enclosure features an aluminum case with an ABS frame, which makes it portable and durable. Using a USB 3.2 Gen 2 Type-C cable, this enclosure features data transfer rates of up to 10 Gb/s. You don’t need an external power supply because this enclosure is bus powered.
In the Box
- Sabrent USB 3.2 Type-C Tool-Free Enclosure for M.2 PCIe NVMe and SATA SSDs
- USB Type-C to Type-C Cable (8″)
- Limited 1-Year Warranty
User Manual
1.7 MB
- Description
- Compatibility
- 100% Tool-Less Design
- Design
- Speed
- Plug and Play
Sabrent EC-SNVE Specs
| Number of Bays | 1 x M.2 (2280) |
| I/O | 1 x USB Type-C (USB 3.1 / USB 3.2 Gen 2 (10 Gb/s)) |
| OS Compatibility | Windows 7 or Later macOS 10.5 or Later Linux *As of June, 2021: Check with manufacturer for the most up-to-date compatibility |
| Power Source | USB |
| Cable Length | 8″ / 20.3 cm |
| Dimensions | 5.59 x 5.76 x 0.63″ / 14.2 x 14.63 x 1.6 cm |
| Weight | 4.3 oz / 122.0 g |
| Package Weight | 0.265 lb |
| Box Dimensions (LxWxH) | 5.7 x 4.6 x 0.8″ |
Sabrent EC-SNVE Reviews
Easy as cake
After replacing the SSD in my laptop with one of higher capacity, I put the old SSD in this enclosure. It was very easy to use, and it has performed well so far. I use it as an external drive now, and I have even been able to boot the old OS from it!
Just what I needed!
I bought this with WD 500GB WD_Black SN770 NVMe M.2 SSD and they work well together. My intended use was to use this as SSD boot for my Raspberry Pi 4 and it’s a game changer. I wish it also comes with USB-C to USB-A as well, but It is still a great product for the price.
works great!
Upgraded to faster m.2 drive and got this to clone existing drive and utilize it as fast external hard drive. Works great. Get speeds around 1000mb/s
Fast and Easy
Super easy tool free assembly that stays secure. Dropped a 2TB Samsung Evo in it, and it works great on PC, MacBook, and iPad.
Great Budget Enclosure
I got this enclosure to dual boot Windows on my iMac with an SSD. The installation of the SSD is incredibly easy and fast, just be careful of when you put the SSD in to do it at an upward angle until the SSD slots in without forcing it. After the SSD was seated the enclosure easily closed up and it was ready for use. There is a thermal pad to transfer heat to the case which acts as a large heat sink. So far with constant use and installing a bunch of software on it all at once, the case has only slightly warmed to the touch. There really is no need to worry about overheating because even under a constant load the case does a good job of drawing the heat away. For the price it is a great option.
It died during a disk format
I liked the design and it seemed to work fine until one day while I was formatting a Samsung 970 Evo SSD the enclosure disconnected and the computer no longer saw the drive at all. Took the SSD out and it worked fine in another enclosure (and in a computer) so I can only assume the controller of the Sabrent enclosure just up and died during the format for some reason.
Need this for cloning my SSD, now it’s a back up SSD
This is simply an enclosure that your new SSD goes in during the cloning process. Most videos and instructions don’t clearly mention how to lock the SSD in place…but it’s simple. Once the SSD is in you secure it by a locking mechanism on the bottom. It was tough to move but when I used a small screwdriver to move the lock…it locked! It was a little tough…just needed a bit more umph. Once the cloning is done you switch out the SSD in your computer. You can then take the old SSD and put it in the enclosure and use it as a memory stick. So now I have a 512gb memory stick and 2tb memory in my laptop.
Dead on Arrival
Didn’t work on arrival. Tried on a couple of macs.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Be the first to review “Sabrent USB 3.2 Type-C Tool-Free Enclosure For M.2 PCIe NVMe And SATA SSDs(Sabrent Usb 3 2 Type C Tool Free Enclosure For M 2 Pcie Nvme And Sata Ssds)”
Related products
3D Printer & Supplies
Creality K1 Ceramic Heating Block Kit(Creality K1 Ceramic Heating Block Kit)
3D Printer & Supplies
3D Printer & Supplies
3D Printer & Supplies
UltiMaker 2.85mm CPE Filament (750g, Light Gray)(Ultimaker 2 85mm Cpe Filament 750g Light Gray)
3D Printer & Supplies
3D Printer & Supplies
UltiMaker 2.85mm Tough PLA Filament (750g, Red)(Ultimaker 2 85mm Tough Pla Filament 750g Red)
3D Printer & Supplies
3D Printer & Supplies
UltiMaker 0.60mm Nozzle (5-Pack)(Ultimaker 0 60mm Nozzle 5 Pack)
Reviews
There are no reviews yet.