Sale!

Louroe ASK-4 #122 Audio Monitoring Kit(Louroe Ask 4 122 Audio Monitoring Kit)

Original price was: $342.00.Current price is: $96.99.

SKU: DGFUB 9002410704 Category: Optics & Surveillance Tags: Audio Surveillance, Louroe LE-393, Surveillance

Elevate Your Shopping Experience
Product guarantee 100% satisfaction
The quality solution for all your needs.
Streamlined service, designed for your convenience.

Description
Reviews (0)

2-Zone Audio Monitoring System
Interfaces with Line Level Input Devices
Built-In Speaker for Live Audio from DVR
Headphone Jack Included for Privacy
Base Station Supports 2 Louroe Mics
2 Omnidirectional Mics Included
Mics Pick Up Sounds Up to 15′
Sturdy ABS Microphone Housing
Mics with Built-In Sensitivity Switch
Place Mics Up to 1000′ from Base Station

The ASK-4 #122 Audio Monitoring Kit from Louroe Electronics is a 2-zone audio monitoring system designed for audio monitoring and interfacing with DVRs, VCRs, or other audio devices that accept line level input. This kit consists of an AP-2 Desktop Base Station, 2 Verifact A Microphones, an AD-1 Plug-In Switching AC Adapter, and a Dual RCA Cable for connection to a DVR / VCR or other audio devices that accept line level input (0 dB @ 600?). It is suitable for use in convenience stores, fast food restaurants, booking rooms, interrogation rooms, day care centers, sleep disorder centers, therapy labs, cashier booths, gas stations, or anyplace where CCTV cameras are installed.

The AP-2 Desktop Audio Base Station is a non-alarming audio monitoring base station that provides 2 audio zones. The AP-2 audio base station will accommodate 2 Louroe microphones and has 2 line level audio outputs. It contains a 3″ (7.62cm) built-in speaker for producing live audio and audio playback from a DVR. In addition, it also contains a selectable RCA audio output for interfacing with a DVR with only one audio input, or with a VCR. Zone selection can be done by using the pushsummary.

The Verifact A Microphone is an omni-directional, low impedance, electret condenser microphone with a built-in preamp for producing line level audio. It is housed in a high impact ABS dome designed for ceiling or wall mounting. The normal pick-up pattern is approximately up to 15′ (4.57m) from the microphone location towards all directions, or within aï¿½30′ (9.14m) diameter circle.

Note: Wiring Requirements: 2-conductor shielded cable, 22 gauge with a 24 gauge drain wire.
Unshielded cable is not suitable for audio systems.
When this equipment is used as part of an audio monitoring system, the law requires that the public be given notice of AUDIO MONITORING ON THE PREMISES. A decal notice is included with each microphone shipped.

AP-2 Audio Base Station

Built-in amplifier and 3″ (7.62cm) speaker for monitoring live audio and playback
Audio output (each zone) for connection to a DVR with multiple audio inputs
Volume control
Headphone jack for private monitoring

Verifact A Microphone

Sturdy ABS housing
Microphone can pick up normal sounds up to 15′ (4.57m) away
Easy surface mount to wall or ceiling
May be located up to 1,000′ (305m) from base station
Phantom powered from Louroe base station
Microphone preamp contains sensitivity switch for lowering gain

UPC: 785583003937

In the Box

Louroe ASK-4 #122 Audio Monitoring Kit

AP-2 Desktop Audio Base Station
2 x Verifact A Microphone
AD-1 Plug-in Switching AC Adapter
Dual RCA Cable for Connecting to VCR / DVR
Limited 1-Year Warranty

Base Station
Input Sensitivity	0.78 Vrms from remote microphone
Output Power	Monitored: 1.5 W @ 8 ?
Line Output Impedance	600 ? or higher (for audio)
Audio Input Impedance	10 k?
Frequency Response	100 Hz to 10 kHz
Headphone Impedance	8 to 600 ?
Power Supply	12 VDC, 500 mA
Dimensions (L x W x H)	8.50 x 9.50 x 2.13″ (21.59 x 24.13 x 5.41 cm)
Weight	3.5 lb (1.6 kg)

Microphone
Type	Electret condenser microphone
Output	Line level (0 dB @ 1,000 ?)
Frequency Response	40 Hz to 15 kHz ï¿½ 1 dB
Current Drain	4 mA
Supply Voltage	12 VDC, 500 mA
Dimensions (ï¿½ x H)	4.0 x 1.5″ (10.2 x 3.8 cm)

Adapter
Input	100 to 240 VAC, 60 Hz, 0.3 A
Output	12 VDC, 500 mA

Packaging Info
Package Weight	3.0 lb
Box Dimensions (LxWxH)	22.2 x 10.4 x 9.8″

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.