Lian Li LANCOOL II Mesh Performance Mid-Tower Case With USB Type-C (Black)(Lian Li Lancool Ii Mesh Performance Mid Tower Case With Usb Type C Black)
Original price was: $359.00.$96.99Current price is: $96.99.
- Elevate Your Shopping Experience
- Product guarantee 100% satisfaction
- The quality solution for all your needs.
- Streamlined service, designed for your convenience.
Lian Li LANCOOL II Mesh Overview
- 1Description
- 2Advanced Cooling
- 3Included Fans
- 4Four-Mode Fan Control
- 5Maximum Airflow
- 6Playing with Style
- 7Big on the Inside
- 8Room for Expansion
- 9Easy Cable Management
- 10Full Filtration
Enhance your computer build with style and efficiency with the LANCOOL II Mesh Performance Mid-Tower Case from Lian Li. Built to fully optimize airflow for high-performance systems, this black steel mid-tower case features a ventilated mesh grille front panel alongside honeycomb vents and a mesh bottom-left shroud panel. They complement the two included 140mm 600 to 1200 rpm front PWM fans and the rear 120mm 600 to 1500 rpm ran to help maintain optimal system temperatures. The removable bracket makes it easy to install up to three 120 or two 140mm fans, or a 360mm radiator on the front panel. It can also be positioned in four different configurations to optimize cooling for your build. Up to two 120 or 140mm fans can be installed on the top for maximum airflow, or you can mount a 240mm radiator for liquid cooling. You can also install up to two 120mm fans on an internal panel for dedicated PSU cooling. The case includes a four-mode fan controller on the top panel, which allows you to manually control fan speeds to suit your usage.
The LANCOOL II Mesh Performance has seven full-size expansion slots with a modular drive cage that holds up to three 2.5/3.5″ storage drives. Dual 2.5″ drive mounts can be found behind the motherboard tray, on the bottom-right flip shroud, and above the PSU chamber. Both sides feature hinged magnetic tempered glass panels, providing a full view of your build. Specialized cover plates offer easy cable management while hiding them from sight. Two USB 3.1 Gen 1 Type-A ports , a single USB Type-C port, and a 3.5mm audio jack are built into the top panel for easy access.
- Description
- Advanced Cooling
- Included Fans
- Four-Mode Fan Control
- Maximum Airflow
- Playing with Style
- Big on the Inside
- Room for Expansion
- Easy Cable Management
- Full Filtration
Lian Li LANCOOL II Mesh Specs
| Motherboard Support | ATX, E-ATX, Micro-ATX, Mini-ITX |
| External Drive Bays | None |
| Internal Drive Bays | 3 x 2.5/3.5″ |
| Additional Drive Mounting | 2 x 2.5″ (Motherboard Tray) And 2 x 2.5″ (Side) And 2 x 2.5″ (Bottom) |
| Expansion Slots | 7 x Full Height |
| Maximum GPU Length | 15.1″ / 384 mm |
| CPU Cooler Height | 6.9″ / 176 mm |
| Supported PSU Size | ATX |
| Maximum PSU Length | 8.3″ / 210 mm |
| PSU Mounting Location | Bottom |
| Fan Mounting (Front) | 3 x 120 mm Or 2 x 140 mm |
| Fan Mounting (Rear) | 1 x 120 mm |
| Fan Mounting (Side) | None |
| Fan Mounting (Top) | 2 x 120 mm Or 2 x 140 mm |
| Fan Mounting (Bottom) | 2 x 120 mm |
| Fans Included (Front) | 2 x 140 mm (Variable rpm) |
| Fans Included (Rear) | 1 x 120 mm (Variable rpm) |
| Fans Included (Side) | None |
| Fans Included (Top) | None |
| Fans Included (Bottom) | None |
| Maximum Radiator Size (Front) | 360 mm |
| Maximum Radiator Size (Top) | 240 mm |
| Fan Mounting (Internal) | None |
| Fans Included (Internal) | None |
| Noise Level | 25.8 to 26.1 dBA |
| Fan Controller Included | Yes |
| Filter Locations | Bottom, Top |
| I/O | 2 x USB-A (USB 3.0 / 3.1/3.2 Gen 1) 1 x USB-C (USB 3.0 / 3.1/3.2 Gen 1) |
| Media/Memory Card Slot | None |
| Audio I/O | 1 x 3.5 mm Input/Output |
| Display Connections | None |
| Windowed Panel | Yes |
| Material | Steel, Tempered Glass |
| Built-In Lighting | No |
| Tool-Less Design | Thumbscrews |
| Dimensions (W x H x D) | 9 x 19.4 x 18.8″ / 229 x 494 x 478 mm |
| Package Weight | 28.25 lb |
| Box Dimensions (LxWxH) | 22 x 21.5 x 12″ |
Lian Li LANCOOL II Mesh Reviews
Best Bang for the buck
Love this case, very easy to build a PC using this case, superb airflow, modular, and gives you many options for mounting AIO’s and drives. Best case I have used to date!
Worth it!
I was a little Hesitant at first as it was my first time using this website. Also this is the cheapest I’ve found this case after tax on any website ! Needless to say the shipping was very quick and the item was as described seems very high quality and I’m extremely happy with my purchase!
Great build quality and functionality. Good sized case.
I found this case very solid and well built for its price range. Also its size is good, coming from a much bigger mid tower.
Perfect airflow case
I love this case and highly recommend it. There are a few minor downsides, though. Pros: – Excellent airflow (fans on the PSU shroud pointing at the GPU lower my GPU idle temps to 43 degrees) – Easy access to all your components with the lack of screws for the side panels – It just looks incredible – Included ARGB hub can be directly connected to the MOBO and act as a splitter Cons: – No way to screw the side panels in place for transport (I’m not moving it around much and the magnets are pretty strong, so not an issue for me, just something to be aware of) – The glass side panel on the back is a bit unnecessary (it’s nice, but you don’t see much and some cost could have been saved) – Included fans are 3-pin meaning any fan hub will run them at full speed (The Phanteks fan hub has dedicated 3-pin ports for controlling speed, I’d recommend getting that if you don’t have enough headers on your MOBO) – The included ARGB controller doesn’t have very good profiles – The ARGB fans don’t use 5v 3-pin connectors, it’s some other standard Overall these are very minor complaints and can all be resolved. I love this case and it shipped quickly and without any damage.
Almost Perfect!!!
Build quality is exceptional. The metals and plastics used are all of high quality. All joints feel strong without any flex. The glass on both sides has a heft to it and feels of high quality. Dust filters are of high quality and don’t feel cheap. I love the use of the magnets on the doors and the dust filters. The power summary and all associated wires feel of high quality. The fans not only look great but are quiet. This case comes with the USB-C port from . There are two RGB versions of this case (one with USB-C and one without). The design is almost perfect. You can tell someone knew what they were doing when they designed this case. Cable management is made easy with plenty of room and removable doors on the back side to do what you want to do. Because the metals are of high quality, installing heavy graphics cards are no issue for this case as the metals have no flex on the I/O areas. It never felt cramped while installing everything. Installing the PSU, Motherboard and all other components was easy. I installed a 240mm AIO and installing it was no issue. I have a Zotac 3080ti (beast of a card) and it fits with ease and it stable. I have huge OCD for no only nice cases but cases that run cool and this case is at the top of every review in regards to how cool it runs. My CPU with my AIO and GPU both run under reviewed temps and I believe this is because of how cool this case runs. The only thing I don’t like about this case is that it will only take a 240mm AIO up top. A 280mm MIGHT fit with very low heatsinks on the memory modules but it would have been so easy for them to design this case to fit Atleast a 280mm easily. Adding a few inches to the height or the width would have made it to where a 280mm would have fit easily up top. I have been building computers for 27 years and this is the best case i have ever used that just gets almost everything right. I highly recommend it.
Great Tower
I purchased the tower and it looks very nice with my gaming setup. Would recommend to anyone looking to purchasing a good tower for your setup
Both sides are windowed
Nobody wants to see the side with all the wires (which is windowed)…. But an easy box to work with overall. Spacious for the size. Very easy access as well.
Cool
Looks good, has plenty of room and easy to navigate.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Be the first to review “Lian Li LANCOOL II Mesh Performance Mid-Tower Case With USB Type-C (Black)(Lian Li Lancool Ii Mesh Performance Mid Tower Case With Usb Type C Black)”
Related products
Electronics & Tools
Dremel 3D Digilab Gluesticks (3 Pack)(Dremel 3d Digilab Gluesticks 3 Pack)
3D Printer & Supplies
3D Printer & Supplies
Electronics & Tools
MakerBot Labs Gen 2 Experimental Extruder(Makerbot Labs Gen 2 Experimental Extruder)
Electronics & Tools
3D Printer & Supplies
UltiMaker 2.85mm PETG Filament (750g, Green)(Ultimaker 2 85mm Petg Filament 750g Green)
3D Printer & Supplies
Polymaker 1.75mm PolyMax PLA Filament (750g, Pink)(Polymaker 1 75mm Polymax Pla Filament 750g Pink)
3D Printer & Supplies
Reviews
There are no reviews yet.