Dolgin Engineering On-The-Go TC400-DSLR-C Four Position Battery Charger Field Kit For Canon LP-E6 Batteries(Dolgin Engineering On The Go Tc400 Dslr C Four Position Battery Charger Field Kit For Canon Lp E6 Batteries)

The Dolgin Engineering On-The-Go TC400-DSLR-C Four Position Battery Charger Field Kit features the TC400 Battery Charger and a hard-sided Pelican 1450 Case with foam. It can simultaneously charge four Canon LP-E6 battery packs in approximately 3.5 hours when all 4 channels are filled. Additionally, each battery bay is independent, meaning that batteries can be added and removed at any time.

The case provides protection for users who constantly travel and work in less than ideal conditions. It features space for additional batteries and cables as well as a custom foam insert to safely hold the charger. For securing the batteries, the charger is configured with lock/release plates.

A 2.6 x 0.6″ LCD display provides information on the charging status of each battery. It provides the information in volts, Ah, and percent of charge. This charger is compatible worldwide with a 100-240V AC or 12V DC car power.

• TC400-DSLR-C Four Position Battery Charger for Canon LP-E6 Batteries

  The Dolgin Engineering TC400-DSLR-C Four Position Battery Charger simultaneously charges 4 Canon LP-E6 battery packs. It will charge batteries in approximately 2.5 hours when all 4 channels are filled. Additionally, each battery bay is independent, meaning that batteries can be added and removed at any time.

  An LCD display provides information on the charging status of each battery. It provides the information in volts, Ah, and percent of charge. This charger is compatible worldwide with a 100-240V AC or 12V DC car power.

• 1450 Case with Foam (Black)

  The Pelican 1450 Case with Foam (Black) is an unbreakable, watertight, airtight, dustproof, chemical-resistant and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. It includes a 0.25″ (6.4 mm) neoprene o-ring, easy-open double throw latches that seal perfectly, and�an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. The case has a comfortable rubber over-molded handle.

  This case includes a 3-piece foam set.

  Construction

  • Ultra High Impact structural copolymer
  • Watertight, crushproof, and dustproof
  • Foam interior
  • Open cell core with solid wall design
  • Stainless steel hardware

  Three-piece foam set that consists of 1 “egg crate” foam upper section, 1 Pick ‘N’ Pluck foam section and one 1.0″ blank bottom foam section

  Automatic pressure equalization valve

  0.25″ (6.4mm) neoprene o-ring

  Easy-open double throw latches with stainless steel padlock protectors

  Temperature rating -40 to +210�F (-40 to +95�C)

  Comfortable rubber over-molded handle

  Certifications

  • IP67 (Ingress Protection) = 1 meter submersion or 30 minutes
  • MIL C-4150J (Military Standard)
  • Defense standard 81-41/STANAG4280

  UPC: 019428010805

• Limited 2-Year Warranty

• 1453 O-Ring

• 1451 Foam Set

• Unconditional Lifetime Guarantee of Excellence

Also Includes

• Limited 3-Year Warranty