Dolgin Engineering On-The-Go 4-Position Charger Field Kit For Panasonic AG-HMC150 & VW-VBG6 Camera Battery Packs(Dolgin Engineering On The Go 4 Position Charger Field Kit For Panasonic Ag Hmc150 Vw Vbg6 Camera Battery Packs 1)

The Dolgin Engineering On-The-Go 4-Position Charger Field Kit includes the TC400-HMC150-TDM 4-Position Battery Charger in the Pelican 1450 Case with custom foam insert. This kit is suitable for users who have to travel and work offsite in demanding conditions.�

The TC400-HMC150-TDM Battery Charger features 4 premium mousetrap lock / release battery plates for charging Panasonic AG-HMC150 and VW-VBG6 camera battery packs. The charger features an LCD display that indicates the charge status and true capacity upon charge completion. As the battery is charged, its status is displayed in volts, Ah (as counted by the charger fuel gauge), and percentage charge (estimated using a proprietary algorithm). The charger features a built-in TDM (Test / Discharge Module) for automatic testing of the batteries.�The TDM tracks the battery through the charge-discharge-charge cycle and reports the true battery capacity as tested.

The Pelican 1450 Case with custom foam insert is a hard, unbreakable, watertight, airtight, dustproof, chemical-resistant, and corrosion-proof case used to carry any kind of equipment that needs to be protected from the elements. It is made of an Ultra High Impact structural copolymer that makes it extremely strong and durable.�

This case includes a 0.25″ (6.4mm) neoprene o-ring, easy-open double throw latches that seal perfectly, and�an automatic pressure equalization valve for quick equalization after changes in atmospheric pressure. The case has a comfortable rubber over-molded handle. Apart from housing the battery charger and the AC adapter (included with all 4-position chargers), it also has room for storing batteries, cables, etc. (sold separately).

• TC400-TDM Four-Position Simultaneous Battery Charger for Panasonic VW-VBG6 and CGA-E/625

  The TC400-HMC150-TDM from Dolgin Engineering features integrated battery plates that support Panasonic and third-party VW-VBG6 and CGA-E/625 batteries. These batteries are used with Panasonic’s HMC150, AF100, AC130, AC160, and HMC70 cameras.

  The TC400-TDM has an LCD screen on the front panel that displays charge status in volts, amp hours, and percentage of charge that’s estimated using a proprietary algorithm. The TC400-TDM is also designed with a built-in Test/Discharge Module that allows you to determine whether a battery is new or old, and whether it’s on par with its label. The TDM feature cycles the battery (fully charges and discharges it) and then provides a report on its capacity.

  The TC400-TDM has fully independent channels and provides simultaneous charging to all four batteries. Based on a capacity of 5600mAh, this particular model delivers a complete charge in approximately 3.5 hours for four batteries or when you charge a single battery.

  The charger comes with a U.S. power cord and supports worldwide power input via optional plug adapters, as well as 12 VDC car lighter power via an optional car lighter adapter (model # DE_CAR_12).

  Compatible Batteries

  • VW-VBG6
  • CGA-E/625

• Power Cord

• Limited 2-Year Warranty

• 1453 O-Ring

• 1451 Foam Set

• Unconditional Lifetime Guarantee of Excellence