Audix M70WD Overview
The M70WD Flush-Mount Ceiling Microphone from Audix is a steerable, flush-mount condenser microphone designed for the Audix Dante AES67 integrated microphone system (sold separately). It delivers audio and all microphone functions�including on-off contact closure and LED status indicators�through a single Cat 5 to Cat 7 cable with RJ45 connections for video teleconferencing, distance learning, boardrooms, surveillance, hospital and medical procedures, and ambient room miking applications.
The M70WD capsule is housed within a cradle that allows the microphone to be aimed up to an angle of 45°. Other features include: a fully integrated preamp and an extremely high-sensitivity rating with complete immunity from RF interference. In addition, installing the M70WD requires a single 2″ hole in the ceiling, with no additional tools needed.
In the Box
Audix M70WD Specs
| Transducer Type | Condenser |
| Frequency Response | 60 Hz to 10 kHz |
| Polar Pattern | Cardioid |
| Output Impedance | 150 Ohms |
| Sensitivity | 38 mV/Pa @ 1 kHz |
| Equivalent Noise Level | 22 dB (A-Weighted) |
| Signal to Noise Ratio | 72 dB |
| Maximum SPL for 0.5% THD | ?130 dB |
| Dynamic Range | 108 dB |
| Power Requirement | Phantom Power: 18 to 52 V |
| Connector | RJ45 |
| Cable | Recommended: Cat 5 / 5e / 6 / 6a / 7 |
| Material of Construction | Brass, Aluminum and Steel |
| Dimensions (L x W) | 2.5 x 0.5″ / 6.4 x 1.3 cm |
| Weight | Not Specified by Manufacturer |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.






Reviews
There are no reviews yet.